DWLAP. b/g Access Point. Command Line Interface Reference Manual. First Edition (January ). RECYCLABLE. Step 1 Open your web browser such as Internet Explorer and enter the IP address of the DWLAP in the Address bar and press Enter. The default IP. Access Point Mode The DWLAP is set to Access Point (AP) mode by default , which allows the DWLAP to connect to wireless clients.
|Country:||Central African Republic|
|Published (Last):||15 May 2009|
|PDF File Size:||17.33 Mb|
|ePub File Size:||10.66 Mb|
|Price:||Free* [*Free Regsitration Required]|
Open your web browser and type the IP address of the access point in the address bar.
Warranty Warranty Period or ninety 90 days, whichever is longer, and is subject to the same limitations and exclusions. If you encounter inconsistent data flow, only minor modifications to the value range fwl-2100ap and are recommended Transmit Power: If you are configuring your access point from a wireless adapter, you will lose connectivity as soon as you click Apply.
Page 46 When you click Browse in the previous screen, the dialog box shown above appears. A blinking light indicates data is being transmitted via the Ethernet port.
However, wireless devices can still send data to the Ethernet devices. Check that the drivers for the network adapters d-linkk installed properly.
d-llink The default is recommended. Table of Contents Add to my manuals Add. Insert one end of the cable to the Ethernet port on the dwl-2010ap panel of the DWLAP and the other end of the cable to your network switch or router. Page 74 To load a previously saved configuration file, follow these steps: Select Enable or Disable from the drop-down menus.
After the access point restarts, you will be required to enter your new user name and password. Step 3 Click on the Advanced tab and then click Encryption on the left side. Click Apply and then click Continue to save the settings. Please follow all the instructions in this window: This field is unavailable when DHCP is chosen.
AP Client Allows you to use the access point as a wireless client. Enter the current password blank by default. Advanced Performance Settings Wireless Band: This value should remain at its default setting of Beacons are packets sent by an access point to synchronize a network.
Enabling this allows wireless clients to communicate with each other. Select the key you want to use from the Valid Key drop-down. Enter the IP address maual the log server.
Select Open System to communicate the key across the network. Allows you to kanual or disable the broadcasting of the SSID to network clients.
D-link DWL-2100AP Manual
You may do this by pressing the Reset button on the back of the unit. D-Link provides free technical support for customers within the United States and within Canada for the duration of the d-lino period on this product. Use this function to assign the Static Pool Settings: Power Receptor Used to connect the supplied power adapter. By default the encryption is disabled.
Internal Station Enabling this feature allows wireless clients to communicate with Connection: Step 3 Select the Advanced tab and then click Filters on the left side. WDS Wireless Distribution System allows access points to communicate with one another wirelessly in a standardized way.
Enter your username admin and your password leave blank by default. Auto Channel Select Enable or Disable.
D-LINK DWLAP INSTALL MANUAL Pdf Download.
The access point will scan for the best available channel. The wireless adapters will automatically scan and match the wireless setting. Accept — Blocks all clients except for what you dwl-2100a; in the list.
Using a power supply with a different voltage than the one included with the DWLAP will cause damage and void the warranty for this product. The DNS translates domain names such as www. System Log System Log The log information will include, but not limited to, the following items: